Last Post By: Clavinavi, 3 days ago
I have the VH intake, Bassanni Exhaust. I used the VH map for that set up. I called the VH people and they said to choose the one that was similar.

Last Post By: Pittsburghpilot, 3 days ago
Thanks for the info. everyone it is really appreciated.

Last Post By: Pittsburghpilot, 4 days ago
Please do I have been wanting to do that mode myself.

Last Post By: steelrain, 9 days ago
Well.. sad to say it snapped again today. I talked to the dealer and after some negotiation they have gotten me a new bike at same payment of my 750.

Last Post By: thewhitegorilla, 16 days ago
I have to ask are there any plastic parts after the glass us out? I cant really tell from the pics. I do need glasses.

Last Post By: Pittsburghpilot, 23 days ago
From the Harley dealer, it was only $12 and $1 per screw. You really don’t need them they are just 1/4-20 with some lock tite on them. I just dr

Last Post By: smitty901, 25 days ago
Yes and no. Some tire products like Ride on are meant to balance , it also offers some sealing. very good product. However you must ID the problem be

Last Post By: Solo750owner, 30 days ago
I use a pneumatic brake fluid bleeder. Just need an air compressor to make it work. Makes it quick and easy. https://www.youtube.com/watch?v=wDSy

Last Post By: smitty901, 1 month ago
IF you feel a need to alter the MAP , look at the Power Vision. Much more than a Tuner it has a lot of tools you may wish to have you can leave it on

Last Post By: smitty901, 1 month ago
One problem you over looked 15 inch bike wheel do not except 15 car tires 16 inch is the smallest it works for. If you wish to try it anyway this is

Last Post By: Solo750owner, 1 month ago
I used the stock handlebar clamp. Replaced throttle/idle, brake and clutch cables. Used Magnum cables. Had to drill out holes for the switch housin

Last Post By: Liquiddog2, 1 month ago
Check the connector is plugged in on the hand brake. It comes off easily. I was hanging my helmet on that side and I think that knocked it off.

Last Post By: Liquiddog2, 2 months ago
I'm awaiting a Mustang Touring seat to arrive. I'm 5'11 with a 32" inseam. I'll post how it works out. It's supposed to move the rider up slightly

Last Post By: Tucsonmax1, 2 months ago
If I remember correctly, The 15 I had used the Same number front and rear. FA643V is what I used.

Last Post By: thewhitegorilla, 3 months ago
What grease did you use?

Last Post By: monicapoll950, 3 months ago
We offer our exclusive clients the ability to gain IELTS,GRE,TOEIC,TOEFL,PET, FCE, CAE, CPE, BEC,YLE, KET,BULATS,ILEC, ICFE CELTA,DELTA ESOL AUTODESK

Last Post By: PugslyCat01, 3 months ago
Removal shouldn't be a problem. If you go to the HD site and shop for parts they have links to the installation manual for each part. Look up the bar

Last Post By: smitty901, 3 months ago
Smart move. Not all the latest greats ways to pick your pocket are good ideas

Last Post By: voltage640, 4 months ago
It had to have been somewhere.. no reason why these cables prematurely broke otherwise. My next set will be lubricated with oil change intervals. I kn

Last Post By: PugslyCat01, 4 months ago
Yea, I don't see retrofitting the ABS to be a financially sound decision. There is a lot to it, and getting a different bike may be cheaper and easier