Harley Davidson Street Forums banner

Swingarm Replacement?

2K views 2 replies 3 participants last post by  smitty901 
#1 ·
Hi Everyone,
My son laid down his Street 750.
Most of the damage is cosmetic, and straightforward unbolt and replace.
But the swingarm is bent.
I have a line on a good used one, but not sure what's involved in removing and replacing this.
Any tips, or things to watch out for?
Or better yet, a procedure?

Thanks y'all,
Mark.
 
#3 ·
Swing arm swap is easy. But will take some home work. You should have a shop manual .If swing arm is bent there maybe issues getting shock bolts out.

Warning block and secure the bike well before going at it. Wear you can see damage or not there is a good chance the shocks are also damaged.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top