Just curious as to what everyone would suggest for windshield and saddlebags for 2015 street 500

Pics? and where to find?

Thx

Attached Images

File Type: jpg

DSC_5967.jpg (110.5 KB, 41 views)

I have these bags from Willie and Max: https://dowcopowersports.com/willie-...-set-59588-00/


And Trunk Bag: https://dowcopowersports.com/willie-...runk-59592-00/


Trunk bag needs the Backrest.


I'm using the HD Windshield. At the time I installed, Aftermarket didn't have much of a selection.

Here is a photo.

Attached Images

File Type: jpg

750.jpg (287.1 KB, 67 views)

we have the EZ bracket mount for our bags. it sits a little wide on the bike but not too bad. and you have the option of dropping the bags whenever you like and running without them. you can mount whatever bag you like with them. the pics show viking bag mediums
bracket- Great Bike Gear- home of Easy Brackets & motorcycle accessories


bracket without the bag


the windshield is HD stock but I hear National Cycle has some really good options so does Memphis Shade

Thankyou for all the pics and Info tucsonmax1 and ceddie really appreciate it bikes look great I found a windshield through national cycle that will fit over the fairing so it is on way also thinking about the viking bags as they are form fit to our bikes with the shock cutout..

Thanks again for the info

I placed my Saddle Bags under the seat. If you wanted them on top, They do have larger version. Not sure if it will fit.

I have Viking hard bags with leather.. lockable and water tight. For sale right now. PM for details. Windshield is also for sale too.

https://www.hdstreetforums.com/forum/...redrilled.html

Tucsonmax1, is the Harley windshield adjustable vertically? I want one, but am worried it will be too tall - unless it can be adjusted up or down.
thx!

The Harley Shield clamps to the Fork Tubes. And is Removable. It has a little bit of Vertical Adjustment. Not much. 1/8" or so maybe. When I put it on, I just put it on as high as it can go. The Instruction Sheet needs work. They showed the Clamps in one direction in one picture. Then in the opposite on another. They don't mention How tight to make the clamp bolts. Too loose, It wont clamp properly. Too tight, Wont fit on.


For some reason, Most of the Harley Instruction Sheets look like they were written by a Dyslectic person.

Maybe that's because they are manufactured in non English speaking countries??

Sent from my VFD 300 using Tapatalk