headlamp replacement
1 - 2 of 2 Posts
Joined
·
112 Posts
It's tight with the 5 3/4 assembly. If I was a betting man, I would say no without some modification to the bracket that attaches to the trees to move the assembly forward a tad.
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Rear shock setting
Harley-Davidson Street General DiscussionHi all I have a Street Rod and as per my weight the rear shock should be set at 2. I looked at my bike and I think it's set at 4 though the mechanic at the dealer thinks it's set at 4. I'm sure I'm right so I've attached a picture here. Can anyone confirm if I'm right or not? Thanks- 2
- 44
-
Jaz · updated
-
Just traded my XG750 for... Indian Scout- few comments of mine
Harley-Davidson Street General DiscussionOf course it was not a 1:1 trade (especially taking into account the fact, that Indian is brand new and my XG was 3 years old and had 21kkm on a tacho...) but decided to say good by to my small HD. Although it was a quick decision , I'd call it a result of a longer process. I had this bike for...- 3
- 199
-
autko · updated
-
New guy...tuner question
Harley-Davidson Street General DiscussionHi, I just bought a 2008 rod with V&H pipes. I think that's the only mod. What tuner would be best? Other mods?? thanks- 2
- 209
-
Weoala · updated
-
Harley-Davidson reports loss, plans to reduce future models
Harley-Davidson Street General DiscussionLast night on YouTube I saw the video from this Revzilla Common Tread article. I think this is, believe or not, possibly a good thing for the Street family of bikes if not H-D as a whole. My take on it is that H-D is in no rush to spend any research and development dollars on replacements for...- 2
- 163
-
How do I remove the shift lever?
Harley-Davidson Street General DiscussionI just purchased a 2015 XG500 and it has a bent shift lever. I purchased a replacement, but don't know how to remove the existing lever. It seems like it's held on with some sort of lockring.- 2
- 130
Join now to ask and comment!