https://www.youtube.com/watch?v=_CA0DR4GSQg
hydrographics, a different way of getting a custom look for tanks, wheels, helmets....etc..
hydrographics, a different way of getting a custom look for tanks, wheels, helmets....etc..
Hydrographics..
1 - 3 of 3 Posts
I can sit and watch that stuff for hours....what they don't cover is the prep work, the cost, the clear coats afterwards.....none the less, awesome effects
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Left turn signal and horn are not working
Harley-Davidson 750 Street TechHello everyone, I ride a 2007 Heritage Classic. I noticed a couple of days ago that my horn was not functioning. Today, I noticed that my left side turn signal is not working either. The hi/low beam functions fine as well as every other accessory on the bike. I checked over the fuses but...- 1
- 66
-
BT Code Reader/Scan Tool
Harley-Davidson 750 Street TechHi all. Found a company on Amazon. Called Motorscan. They make adapters that plug into the Diagnostic Ports for the HD 4 and 6 Pin connectors. Price is just under $200 USD. I ordered one from Amazon. A week later it finally arrives. Open the package. What to my Dismay? Not only did Amazon ship...- 13
- 1K
-
Tucsonmax1 · updated
-
2016 750 spun bearing
Harley-Davidson 750 Street TechAnyone know if I can get the rods off to change the bearings without separating the cases?- 3
- 551
-
Engine check light stays on after charging dead battery.
Harley-Davidson 750 Street TechHey all, first time posting here :) Good to meet you all. I'll try and keep it brief.. Accidentally left my 2017 XG750 street on (in ignition) while fitting a new slip-on muffler, battery drained completely. Must have been pretty low to start with, It was probably about two hours in all. I...- 5
- 225
-
Ledamit · updated
-
2015 street 750 rear brake
Harley-Davidson 750 Street TechI'm using a 2015 model street 750 done almost 14k km on it. Now the rear brake pressure is very poor, don't have the power to stop the bike. How to fix this issue ? I changed to EBC brake pads. I found 2016 master cylinder will does the job. I need opinions and cost of 2016 master cylinder in...- 11
- 2K
Join now to ask and comment!