Joined
·
1,242 Posts
Hi all. Board today. Tested out a new Scissor type Jack I bought from Northern Tools. Actually pretty easy. Used a Bendix Brake Tool to pop off the spring. Used a Cotter Pin tool to pop it back on. Slid the E-Clip off the back of the pin. Cleaned and Greased with Belray Waterproof lube. Which I had to use another Brake tool for. To slide the E-Clip back on. The one for the Clip on the Parking brake lever.
Also greased the Foot Pegs while I was at it.
Also greased the Foot Pegs while I was at it.
