Harley Davidson Street Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
504 Posts
There are 2 screws & washers at the bottom of the radiator that need to be removed. Then pull out and up, because the top is affixed by a "mounting tab".

When replacing it make sure the tab at the top is properly affixed before reattaching the 2 screws (and washers) at the bottom.

Failure to ensure may result in the cover coming off while riding!

(Page 70 of the Owners Manual, Figure 19 shows the "tab")
 

·
Registered
Joined
·
80 Posts
R&G racing sells a radiator grill that fits under the shroud. I hate the bulky plastic shroud on the bike, does anyone know if taking it off and just replacing with this grill would be sufficient protection for the radiator?


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
15 Posts
my plastic thing broke last week as ran over a stone and came out really power against the plastic thing, i now need to either glue it up or replace it (140$aus) in HD! ripoff!
 
1 - 8 of 8 Posts
Top