[Ratdog Fink]

Hi
I have read a few threads on the back brake pedal being too high on the rod and too low on the Street.
Harley used the same adjuster for both. This will work with both.
The brake height can be adjusted by moving the end of the muffler.
The bracket holding the muffler to the frame is the same one that holds the rear brake master cylinder.
There is a lot of movement of the bracket if the three 8MM bolts that hold it to the frame are loosened and the end of the muffler moved up or down.
This will change the rear brake pedal height.
Then tighten the three bolts and check and adjust the brake.

Regards

RDF.

 

[CISA2016]

thank you for sharing the details and updating a vedio.

Regarding street rod 750 foot controls they can be swapped easy with the street 750/500 foot controls and pedals and will give you 2-3 inches forward and about an inch downward placement of controls from the stock.

regarding height adjust of street 500/750 there Is a tonne of adjustments on the lever . A youtube vedio is shared regarding that and easy