[BPOPaz]

Bought on Ebay from California for $150.
I mistakingly thought it came with a extra baffle because a photo in the ad of the back side view looked like a baffle to me so I figured I would have a couple options. Turns out there was no baffle. I don't know if they offer any or if I can maybe take the end off the stock one or not.
I love the loud sound but have back firing when I let off the throttle or down shift etc.
I know this is because the ECU is dumping fuel.
Trying to figure out if I should do the end cap swap or look into getting the ECU programmed for the change in the exhaust.
Also there's that pesky CAT.
I'll make more comments and upload photos and video if possible. Just getting to know the capabilities for uploads here! Bear with me.
VRROOOOOMMM! Here we GO!
Original Exhaust photos:

 

[BPOPaz]

Now that I'm looking at this original exhaust, I wish I would have considered just taking off the end cap and seeing what that would do...

 

[BPOPaz]

Bought on Ebay from California for $150.
I mistakingly thought it came with a extra baffle because a photo in the ad of the back side view looked like a baffle to me so I figured I would have a couple options. Turns out there was no baffle. I don't know if they offer any or if I can maybe take the end off the stock one or not.
I love the loud sound but have back firing when I let off the throttle or down shift etc.
I know this is because the ECU is dumping fuel.
Trying to figure out if I should do the end cap swap or look into getting the ECU programmed for the change in the exhaust.
Also there's that pesky CAT.
I'll make more comments and upload photos and video if possible. Just getting to know the capabilities for uploads here! Bear with me.
VRROOOOOMMM! Here we GO!
Original Exhaust photos: View attachment 28662
View attachment 28661

View attachment 28660

I assume you can't upoad video here, so I'll upoad the sound video to Youtube and post a link, I think

 

[BPOPaz]

REMOVAL photos

 

[BPOPaz]

REMOVAL continued

 

[BPOPaz]

REMOVAL continued

 

[BPOPaz]

MORE REMOVAL photos..

 

[BPOPaz]

Stock muffler back end view, NO LIGHT period. ( Per design?) There was some loose material in side. Haven't opened it up yet. (unfortunately this photo doesn't show the baffle cuz it's too dark)

Weight of Stock muffler removed. 10lbs.

 

[BPOPaz]

New pipe weigh in.. at 8 1/2 lbs

 

[BPOPaz]

CAT View

 

[BPOPaz]

Front to back view of new pipe.

 

[BPOPaz]

New pipe on getting the heat wrap back on.
One suggestion I have is get new wrap if you can afford. It had started to deteriorate and as an after thought, while getting exposed to fiberglass dust, I would have worn a mask and gloves.;(

 

[BPOPaz]

New pipe on. The heat shield didn't go on perfectly probably because of the way I re-wrapped the CAT and pipe and had it slid back a little too far. (I noticed from the before photo, there is a gap between the heat shield and pipe
end.)

 

[BPOPaz]

Well, I didn't get the before sound video but I think everyone is familiar with the sewing machine sound and very muffled pipe sound.
After sound link here:

 

[BPOPaz]

Well, I didn't get the before sound video but I think everyone is familiar with the sewing machine sound.
After sound link here:

Well, still have sewing machine sound, but that's alright. It's kinda that high techy peppy FI sound that kinda grows on you after awhile and there is quite a contrast to what is coming out the back!
Smooth Roads/Trails !