Harley Davidson Street Forums banner

stock slip on exhaust removal

2536 Views 4 Replies 2 Participants Last post by  Solo750owner
I an trying to remove the stock exhaust pipe as if I am trying to exchange it for a VNH slip on, how do I remove the stick exhaust?
1 - 5 of 5 Posts
I an trying to remove the stock exhaust pipe as if I am trying to exchange it for a VNH slip on, how do I remove the stick exhaust?
You will need a 13mm wrench for the bolts holding the exhaust onto frame and a 15mm socket to loosen the clamp...Hang onto the clamp and the 13mm bolt and nuts. That is how I did it according to the instructions that came with my Firebrand Loose Cannon slip on.
  • Like
Reactions: 1
So would it just pull right off easily or should have to hammer it off?
So would it just pull right off easily or should have to hammer it off?
I wouldn't use a hammer. Pull it off by hand. You will have move it side to side a bit while pulling it.
  • Like
Reactions: 1
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top